发表文章

[Java] 驱动器断电 Power outage in drives[Applied-Energistics-2]

nlogozzo 2017-10-9 48

Minecraft 版本: 1.12。1
AE2 版本: 1.12.1 RV5 Alpha 6
锻版: 1.12。1

一次又一次, 当能量电池完全充电, 我的我的驱动器失去了几分钟的电力, 一切都说设备缺少通道, 但最终电源恢复。这不是一个巨大的问题, 但它是一个烦恼。

原文:

Minecraft Version: 1.12.1
AE2 Version: 1.12.1 RV5 Alpha 6
Forge Version: 1.12.1

Once and a while, when the energy cells are fully charged, my ME Drive looses power for a couple of minutes and everything says Device Missing Channel, but then eventually power is restored. It isn't a huge problem but it is an annoyance.

相关推荐
最新评论 (28)
mindforger 2017-10-9
1

您可能会遇到一个问题与您的电缆布局, 双检查你没有监督回路和记住, 一个设备也可以携带8通道, 可能会抛出您的电缆路由!
重新路由总是在网络更新时发生 (在很远的时候卸载大块)

原文:

you may experience an issue with your cable layout, double check you don't have overseen loops and keep in mind, a device also can carry 8 channels that may throw off your cable routing!
rerouting always happens when the network gets updated (chunk unloading while far away)

fscan 2017-10-9
2

一如既往, 如果你想这个固定的, 不只是抱怨我们, 我们需要一些工作。截图, 日志文件, 准确的描述, 当它发生, 以及如何修复自己。

原文:

As always, if you want this fixed and not just complain to us we need something to work with. Screenshots, log files, description of exactly when it happens and how it fixes itself.

nlogozzo 2017-10-9
3
原文:
nlogozzo 2017-10-9
4

这是我的安装程序的副本
image

原文:

Here is a copy of my setup
image

mindforger 2017-10-9
5

这是安静的一个好结电缆:)

现在的问题是, 它发生时, 你是附近或足够远, 它卸载部分

右边的电缆在哪里?

原文:

That is quiet a good knot of cables :)

Now the question is, does it happens when you are close nearby or far enough for it to unload partially

And where does the cable on the right go?

nlogozzo 2017-10-9
6

它通常发生在我开始移动到远方的时候。同时电缆的权利引出我的房子, 并走遍世界各地, 所以我可以访问存储和电力整个

原文:

It usually happens when I start to move far away. Also the cable to the right leads out of my house and goes throughout the world so I can access storage and power throughout

nlogozzo 2017-10-9
7

image
这是电缆分配到的地方。

原文:

image
That is where the cable distributes to.

mindforger 2017-10-9
8

是的, 这就是我的意思是块卸载, 您离开网络的一部分, 到目前为止, 服务器卸载它和您的新的和更小的网络正在重建..。

只是 chunkload 网络的所有部分

原文:

Yeah that is what i meant with chunk unloading, you leave a part of the network so far away, the server unloads it and your new and smaller network is rebuilding...

Just chunkload all parts of the network

nlogozzo 2017-10-9
9

我没有安装在世界各地的区块装载机, 我仍然有可能有一次和一段时间

原文:

I did install chunk loaders throughout the world and I still have this probably once and a while

mindforger 2017-10-9
10

尝试其他 chunkloades, 有些
工作不好..。在 1.7.10 chickenchunks 没有工作好, 但它的 spotloads 运作良好

原文:

try other chunkloades, some do
not work well ... In 1.7.10 chickenchunks did not work well, but it's spotloads worked well

mindforger 2017-10-9
11

还有, 在伪造配置文件中加载的区块有一个限制, 您可以通过限制

原文:

Also, there was a limit for loaded chunks in the forge config file, you may passed the limit

nlogozzo 2017-10-9
12

有办法增加限额吗?

原文:

Is there a way to increase the limit?

nlogozzo 2017-10-9
13

我只是回到我的房子, 看到它失去了电源看到按钮驱动器熄灭
image

原文:

I just went back to my house and saw that it lost power seeing that the button drive went out
image

nlogozzo 2017-10-9
14

我是在房子里时, 这发生了, 所以这是不是与区块的东西

原文:

I was inside the house when this happened so this isn't something with chunks

mindforger 2017-10-9
15

当然, 如果只有一个网络的一部分被卸载, 它是内部重建, 结果是这样的效果..。有一个伪造配置文件, 只是改变它

原文:

sure it is, if only one part of the network getting unloaded it is rebuilt internally and the result is this effect ... There is a forge config file, just change it

nlogozzo 2017-10-9
16

在我增加了配置文件中允许的加载的块之后, 问题就解决了。但现在, 当然, 一个新的问题出现在围绕同一问题。当从其他维度返回时, 不只是驱动器, 但整个网络失去电源, 我需要重新启动整个服务器, 以获得电力回来。

原文:

That problem was fixed after I increased the loaded chunks allowed in the configuration file. But now, of course, a new problem arose revolving around the same issue. When traveling back from other dimensions, not just the drive, but the whole network looses power and I need to restart the whole server to get power back.

fscan 2017-10-9
17

这个另一个维度也有一个我的网络连接到这一个?此外, 您是否可以使用网络工具检查电源使用情况?

原文:

This other dimension also has an me network connected to this one? Also, can you use the network tool to inspect power usage?

nlogozzo 2017-10-9
18
原文:
nlogozzo 2017-10-9
19

image
这就是当网络完全正常运行时我正在阅读的内容

原文:

image
This is what I am reading when the network is fully up and running

nlogozzo 2017-10-9
20

我会尝试重复的过程, 看看它是否熄灭

原文:

I will try to repeat the process and see if it goes out

fscan 2017-10-9
21

您也可以尝试用智能的缆线来替换电缆, 以可视化频道的使用情况。

原文:

You can also try to replace the cables with smart ones to visualize channel usage.

nlogozzo 2017-10-9
22

我增加了一些智能电缆。似乎没有渠道溢出, 与最大我使用的是10出32频道。我还增加了一些振动室, 产生更多的 AE 功率, 而不是使用发电机 (欧盟的权力从 ic2) 和电力单位正在转换, 这可能是一个问题。从现在开始, 在维度之间来回穿梭并不会造成问题。因此, 您可以关闭此问题, 如果确实发生, 我将创建一个新的票, 如果需要的话。谢谢你的快速回答和支持。有一个伟大的一天

原文:

I added some more smart cables. There seems to be no channel overflow, with the max I am using is 10 out of 32 channels. I also added in some more vibration chambers which generate more AE power instead of using generators (EU power from ic2) and having the power units being converted, which may have been a problem. As of now going back and forth between dimensions isn't causing a problem. Therefore, you can close this issue and if it does happen I will create a new ticket if needed. Thank you for all the quick answers and support. Have a great day

mindforger 2017-10-9
23

因此, 您可以关闭此问题

您创建了问题, 您可以自己关闭它, 就在 "注释" 按钮旁边:)

原文:

Therefore, you can close this issue

You created the issue, you can close it yourself, right beside the comment button :)

nlogozzo 2017-10-9
24

哦, 好吧, 谢谢你没有看到, 笑

原文:

Oh okay thank you didn't see that lol

fscan 2017-10-9
25

你能用智能电缆发布截图吗?另外, 您是否可以尝试使用不同的彩色电缆, 使其不连接到其他电缆?。

原文:

Can you post a screenshot with the smart cables? Also, can you try using a different color cable for the one going outside so it doesn't connect to the other cables?.

nlogozzo 2017-10-9
26
原文:
nlogozzo 2017-10-9
27

image
我的服务器处于离线状态, 所以我进入单个播放器来重新创建该问题。我的密集电缆可以携带32通道, 但普通电缆只能携带8。终端和进出口巴士只能去普通电缆。因此, 我只允许有一个最大的8终端和进口和出口联合公共汽车。因此, 任何超过8的这些项目都将破坏网络。但是, 我可以连接密集的变量到其他机器。我需要大量的终端和进出口总线, 那么是否有办法连接终端到密集的电缆?
image

原文:

image
My server was offline so I went into single player to recreate the issue. My dense cables can carry the 32 channels, but the regular cable can only carry 8. Terminals and import and export buses can only go regular cables. Therefore I am only allowed to have a max of 8 terminals and import and export busses combined. So anything more than 8 of those items breaks the network. But then I able to connect dense ables to other machines. I require a lot of terminals and import and export busses, so is there a way to connect terminals to dense cables?
image

fscan 2017-10-9
28

如果没有控制器, 最多可以有8声道。

请阅读http://ae-mod.info/Channels/

现在我要把这个关了, 似乎这似乎是一个错误的想法。小提示: 您应该将连接到不同控制器端的网络分开, 否则网格有时会表现怪异。

原文:

Without a Controller you can have a max of 8 channels.

Please read http://ae-mod.info/Channels/

I'm closing this now, as it seems this seems to be a misconception of how channels work. A small tip: you should separate the networks connecting to different controller sides, the grid sometimes behaves weird otherwise.

返回
发表文章
nlogozzo
文章数
1
评论数
16
注册排名
60745