发表文章

[Shell] 无法使用管理断开有线网络连接 Unable to disconnect wired network using networkmanager[swagarch-build]

spsf64 2017-10-9 77

我不知道这是一个 swagarch 的问题或上游, 但每当我试图断开 "有线连接" 从 NM 小程序 (检查我的 wifi 或蓝牙连接), 它会自行重新连线。
它不使用名称 "有线连接", 而是使用另一个名称 (即 eno1), 但使用相同的硬件接口。
这是通过 rj45 电缆连接的台式 PC

nm

原文:

I don't know if this is a swagarch issue or upstream, but whenever I try to disconnect the "Wired connection" from the NM applet (to check my wifi or bluetooth connection) it reconnects by itself.
Instead of using the name "Wired connection", it connects using another name (ie. eno1) but using the same hardware interface.
This is a desktop PC connected via rj45 cable

nm

相关推荐
最新评论 (6)
memoryleakx 2017-10-9
1

我已经测试过了, 但我不能重现这个问题。
签出: https://wiki.archlinux.org/index.php/NetworkManager#Working_with_wired_connections

原文:

I have test it, but i don't can reproduce this issue.
check out: https://wiki.archlinux.org/index.php/NetworkManager#Working_with_wired_connections

spsf64 2017-10-9
2

我测试了在现场模式 (usb 棒) 和同样的问题..。
也许是我的硬件?
我将能够做更多的测试, 只有下周。
感谢回复

原文:

I tested in live mode (usb stick) and same problem...
Maybe my hardware?
I will be able do to more tests only next week.
Thanks for replying

spsf64 2017-10-9
3

更多信息, WiFi 和蓝牙都是 usb 器。
我仍然离家3天, 当我将能够检查和提供反馈。

原文:

Some more info, the WiFi and Bluetooth are both usb dongles.
I am still off home for 3 more days when I will be able to check and give feedback.

spsf64 2017-10-9
4

你好麦克
我做了一个新的安装在这个相同的硬件使用 arch-任何地方使用它的默认 "XFCE + arch 任何地方" 组合。
断开连接按预期的方式工作, 即: 它在我想要的时候保持断开。
所以, 我认为这个问题与 Swagarch 有关。
编辑: 请检查我录制的这个小视频:
https://sourceforge.net/projects/arch-mod/files/swagNM.mp4/download

原文:

Hello Mike.
I did a new install in this same hardware using arch-anywhere using it's default "XFCE + arch anywhere" combo.
The disconnection works as expected, ie: it stays disconnected when I want!
So, I think this problem is related to Swagarch
edit: please check this small video I recorded:
https://sourceforge.net/projects/arch-mod/files/swagNM.mp4/download

memoryleakx 2017-10-9
5

更新软件包后, 问题应该解决:)

原文:

after updating your packages the problem should be solved :)

spsf64 2017-10-9
6

在最新的 ISO 中修复了问题, 但在已安装的系统中无法正常工作..。
新的安装工作正常!
谢谢

原文:

Problem fixed in latest ISO, but not working in my already installed system...
New installation is working OK!
Thank you

返回
发表文章
spsf64
文章数
43
评论数
42
注册排名
15015