发表文章
问答

完成第一次设置时忘记了语言选择 "Language selection forgotten when finished first setup"[humhub]

dakur 阅读(3) 评论(1) 0

刚才我正在安装新的 HumHub (当前克隆, 最后一次提交0105c5 从主), 我选择了捷克语在第一次设置, 它很顺利。但是, 当安装完成, 我点击完成, 我..。 Just now I was installing new HumHub (current clone, last commit 0105c5 from master), I chose Czech language in first setup and it went well. But when the setup was finished and I clicked Finish, i...

问答

使用 Cloudflare 灵活的 SSL 时不加载提要 "Feed doesn't load when using Cloudflare flexible SSL"[humhub]

3ruce 阅读(4) 评论(2) 0

运行全新安装的 0.11.2, 使用 Cloudflare 灵活的 SSL, 用户无法看到流/提要中的任何条目。关闭 Cloudflare 灵活的 SSL, 并确保网站负载 http 和没有..。 Running a fresh install of 0.11.2 and using Cloudflare flexible SSL, users can't see any entries in the stream/feed. Turning off Cloudflare flexible SSL and ensuring the site loads with http and no...

问答

用户界面/UX: 评论已经评论的主题什么也不做 "UI/UX: Comment already commented topic does nothing"[humhub]

acsferreira 阅读(5) 评论(5) 0

通过单击主题上的注释链接并在主题上再次单击 "评论" 链接, 张贴一个新的主题回复到该主题->> 不做什么, 它应该侧重于注释输入区域。 Post a new topic Reply to that topic by clicking on Comment link on the topic and post a reply Click again on Comment link on the topic -> Does nothing It should focus on the comment input area.

问答

升级到1.1 后与 LDAP 用户签入紧急问题 "Urgent problem signing in with LDAP user after upgrading to 1.1"[humhub]

djcf 阅读(5) 评论(7) 0

嗨 Humhub 队我们最近更新到1.1。伟大的工作, 修复 LDAP 的错误, 用户无法登录他们的电子邮件地址!但它看起来像新的 ZendLDAPClient 认证库可能公顷..。 Hi Humhub team. We've recently updated to 1.1. Great work on fixing the LDAP bug where users couldn't log in with their email addresses! But it looks like the new ZendLDAPClient auth library may ha...

问答

用户邀请中的 URL 错误 "Wrong URL in users invite"[humhub]

dvas13 阅读(6) 评论(3) 0

您好, 我只是无法修复的 URL 是在用户的邀请。Humhub 安装在我的 NAS 和电子邮件邀请继续发送一个注册链接与本地 IP 在 URL..。在数据库中找不到 entrey..。 Hello, I just can't fix the URL which is in the user invites. Humhub is installed on my NAS and email invite keep sending a sign up link with a local IP in the URL... Found no entrey in database as...

问答

. NET 的微秒 "Microseconds for .NET"[TinyCLR-Ports]

valoni 阅读(8) 评论(2) 0

只为想法做是可能的创建2微秒方法 API 使用从. NET 可以作为分离线程执行 (或任何更好的解决方案的情况下, 以处理微秒的需要..。 Just for IDEA did is possible to create 2 Microseconds Method API to be used from .NET which could be executed as separated thread (or any better solution for cases to deal with Microseconds Needs...

问答

允许在 DeviceSelector 中自定义 GPIO 初始化 "Allow custom GPIO initialization in DeviceSelector"[TinyCLR-Ports]

valoni 阅读(4) 评论(1) 0

在 DeviceSelector 也许是好的, 添加一个选项的针脚拉/下拉声明的默认值 (要包括在编译/创建固件) Gpio 针状态 (拉, 下拉式) declara..。 on DeviceSelector.h maybe is good to add an option for pins pullup/pulldown declaration for default values (to be included on compile/creation of firmware) Gpio pins state (pullup,pulldown) declara...

问答

无法添加更多 UART @ NUCLEO-F411RE "couldn't add more UART @ NUCLEO-F411RE"[TinyCLR-Ports]

valoni 阅读(7) 评论(1) 0

不能添加更多的 UART 在 NUCLEO-F411RE 比这两个 (我想添加 1) 尝试即使与 GPIO_NONE 添加所有, 但只声明那些可用的, 但 unseccfully 我不能得到编译 couldn't add more UART at NUCLEO-F411RE than those two (i want to add 1 more) tried even with GPIO_NONE to add all but to declare only those available but unseccfully i can not get compile

问答

无法添加更多 SPI @ NUCLEO-F411RE "couldn't add more SPI @ NUCLEO-F411RE"[TinyCLR-Ports]

valoni 阅读(6) 评论(1) 0

不能添加更多的 SPI 核我做的例子与 G80 可以添加没有问题, 但 NUCLEO-F411RE 失败编译我相信这是问题可能需要使用 STM32F411xE 而不是 STM32F401xE can not add more SPI on Nucleo i make example with G80 could add without problem but NUCLEO-F411RE fail compile i belive it was problem probably need to use STM32F411xE instead STM32F401xE

问答

将调试器选择更改为使用定义 "Change debugger selection to use defines"[TinyCLR-Ports]

Arke64 阅读(7) 评论(2) 0

USE_MODE_PIN, USE_USB_DEBUGGER, USE_UART_DEBUGGER, 而不是使用 INCLUDE_USBCLIENT 和 INCLUDE_UART。允许强制 USB 或 UART 调试器, 因为一些硬件, 如核板, 可能更适合..。 USE_MODE_PIN, USE_USB_DEBUGGER, USE_UART_DEBUGGER instead of using INCLUDE_USBCLIENT and INCLUDE_UART. Allows forcing USB or UART debugger as some hardware, like nucle

问答

如果我修改了 DeviceSelector 中的一些参数, STM32F4 目标就会中断。 "STM32F4 targets break if i modify some parameters in DeviceSelector.h"[TinyCLR-Ports]

valoni 阅读(7) 评论(3) 0

我尝试了不同的方案, 核 STM32F411RET6 1。我不能添加 SPI 超过 2 (如果我添加它中断编译) 2。我不能添加 UART 超过 2 (如果我添加有问题与定义) 尝试..。 i tried different scenarios for Nucleo STM32F411RET6 1.)i can not add SPI more than 2 (if i add it break compile) 2.)i can not add UART more than 2 (if i add have problem with defination) tried dif...

发表文章

调试网

开源调试指南

文章数
29720
评论数
133686
用户数
84580